Home > Gate Operators > Swing > Ram 300 AC
Ram 300 AC
Gate Travel: 20’
Max. Gate Weight: 800 LBS
ETL Listed: UL 325 Compliant
ETL Listed
Our gate operators have been rigorously tested to meet the strict safety standards set forth by the UL 325 industry guidelines. To comply with these standards external entrapment protection devices will be required to meet UL 325 safety requirements. Your installer will recommend the appropriate types of devices based on your specific installation.
Emergency Foot Pedal Release
Ability to manually open you gate in case of an emergency.
Easy Installation
EP Learn Mode: Created for the convenience of installers to easily install photoeyes.
Left Right Switch: Change the direction of the installation with the switch of a button
Close Delay: Adjustable timer, to meet the requirements of each unique installation
One Pass
Allows for gate to close immediately upon entrance.
Smart Home Compatible
Easily connect devices to the gate operator through the relay connection on the board.
| SPECS | |
|---|---|
| Class | Residential/ Commercial |
| Max Gate Weight | 800 lbs |
| Max Gate Length | 20' |
| Motor | 1/2 Hp, 115 VAC, 4.5 AMPS |
| Cycles | Continuous |
| Gate Speed | 12" per Second |
| VAC | 115- Single phase |
| Battery Backup System | - |
| W x L x H | 20" x 16.5" x 27" |
| Shipping Weight | 110 LBS |
| Emergency Release | Hand Lever |
| RAM 300 AC | ||
|---|---|---|
| PART NUMBER | DESCRIPTION | QTY USED |
| 800-00-83 | Chassis, Ram 300 AC/DC | 1 |
| 800-02-04 | Gear Reducer- Size 50, Ratio 80:1 [R300] | 1 |
| 800-04-10 | Motor,Standard, 120VAC, 1/2Hp | 1 |
| 800-08-00 | Pulley, Cast Iron - 5/8' X 10' - Ak104 5/8 [R300] | 1 |
| 800-08-45 | Pulley, Cast Iron - 5/8" X 2" - Ak20 [R300,R3000S,R3030S] | 1 |
| 800-10-42 | Belt 4L-390 | 1 |
| 800-12-08 | Shaft - 1" X 11 7/8" [R300 Ac/Dc] | 1 |
| 800-14-15 | Cover, Polyethylene Cap Arm [R30,R302,R300,R3000S,R3030S] | 1 |
| 800-20-05 | Limit Switch [R50,R30,R300,R302,R3000S] | 2 |
| 800-20-21 | Limit Switch, Foot Pedal [R300] | 1 |
| 800-22-03 | Spring - 1/4" X 1" [R300] | 1 |
| 800-24-10 | Foot Pedal Release | 1 |
| 800-28-20 | Square Pivot, 1 1/2" - 1" [R300] | 1 |
| 800-28-40 | Pivot Arm Release | 1 |
| 800-44-01 | Bearing, Flange - F205 [R300] | 2 |
| 800-48-05 | Cam, Limit Switch -[R300] | 2 |
| 800-52-11 | Chain, Drive Assembly #40 28 Links [R300AC/DC] | 1 |
| 800-54-27 | Bracket, Limit Swtich [R300 AC/DC] | 1 |
| 800-55-05 | Bracket, Foot Pedal Guide [R300] | 1 |
| 800-55-10 | Bracket, Foot Pedal Switch Lockdown[R300] | 1 |
| 800-60-02 | Transformer, 115/230VAC TO 24VAC | 1 |
| 800-60-10 | Switch, Rocker | 1 |
| 800-65-01 | Control Board, Logic [AC/DC] | 1 |
| 800-65-02 | Control Board, Driver [AC] | 1 |
| 800-70-22 | Horn Alarm Buzzer, 120 Db | 1 |
| 800-70-35 | Knob - 5/16" - 18 X 1 1/2" | 1 |
| 800-70-36 | Knob - 5/16" - 18 X 1/2" | 1 |
| 800-70-98 | Warning Sign For Gates - Slide/Swing | 2 |
| 800-75-05 | Access Door, Stainless Steel [R300] | 1 |
| 800-75-11 | Cover Assembly- R300 | 1 |
| 800-75-41 | Torque Limited Assembly [R300] | 1 |
| 800-06-04 | Sprocket - 40A40 [R300] | 1 |
| 800-26-01 | Friction Disc, Torque Limited - 3 1/2" [R300] | 2 |
| 800-26-10 | Tension Washer, Torque Limited - 3" [R300] | 1 |
| 800-34-22 | Set Screw - 1/4" - 20 X 3/8" | 2 |
| 800-36-20 | Bolt, Hex Head - 3/8" - 16 X 1" | 3 |
| 800-46-30 | Bushing, Steel Sprocket - Id 1.693" : Od 1.992" [R300] | 1 |
| 800-58-02 | Arbor Nut, Torque Limited [R300] | 1 |
| 800-58-11 | Arbor Washer, Torque Limited - 3 1/2" [R300] | 2 |
| 800-58-31 | Arbor, Torque Limited - 1" [R300] | 1 |
| 800-75-22 | Clutch Release Assembly [R300] | 1 |
| 800-22-06 | Spring - 1 1/4' X 3/4' (3 Turns) [R1000,R5500,R300] | 1 |
| 800-06-11 | Sprocket, Clutch Release - 41B21H [R100,R300] | 1 |
| 800-24-02 | 4-Pin Disc [R300] | 1 |
| 800-40-55 | Washer, Flat - Id 1 1/16' : Od 2' : Thickness 1/8' | 1 |
| 800-58-22 | Arbor, Foot Pedal Release [R300] | 1 |
| 800-70-88 | Snap Ring, External - 1 3/8" [R100,R300] | 1 |
| 800-42-30 | Key Way - 1/4' SQ. X 1 1/2' | 1 |
| 800-40-56 | Washer, Flat - Id 1 1/16" : Od 2" : Thickness .090" | 1 |
| 800-75-00 | Arm Assembly [300,302,3000] | 1 |
| 800-28-00 | Arm, Metal Tubing - 1" X 2" X 32" - | 1 |
| 800-28-01 | Arm, Metal Tubing - 1" X 2" X 42" - | 1 |
| 800-36-53 | Bolt, Hex Head - 5/8" - 11 X 4 | 1 |
| 800-38-78 | Nut, Hex Head Nylock - 5/8" | 1 |
| 800-40-40 | Washer, Flat - Id 5/8" : Od 1 5/16" | 3 |
| 800-40-27 | Washer, Flat - Id 1/2" : Od 1" - F436 | 4 |
| 800-36-34 | Bolt, Hex Head - 1/2" - 13 X 2" | 1 |
| 800-38-76 | Nut, Hex Head Nylock - 1/2" | 1 |
| 800-28-30 | Plastic End Cap - 1' X 2' | 2 |
| 800-54-37 | Bracket, Internal Gate 2020 | 1 |
| 800-54-10 | Bracket, External Channel | 1 |