Home > Gate Operators > Slide > Ram 2000 DC
Ram 2000 DC
Gate Travel: 25’
Max. Gate Weight: 800 LBS
ETL Listed: UL 325 Compliant
Slow Stop, Soft Start
Allows for a smooth gate operation without abrupt stops or harsh start
Battery Back Up System
In the event of a loss of power that gate operator will go into battery mode. This allows your gate to continue to operate for a limited period of time, until power is restored.
Emergency Foot Pedal Release
Ability to manually open you gate in case of an emergency.
Easy Installation
EP Learn Mode: Created for the convenience of installers to easily install photoeyes.
Left Right Switch: Change the direction of the installation with the switch of a button
Close Delay: Adjustable timer, to meet the requirements of each unique installation
Fail Safe/Secure
When the battery reached 90% of its capacity and AC power remains unavailable, our system offers you the flexibility to choose the gate's fail position. The gate will either fail in the open or closed position, depending on your needs.
| SPECS | Ram 2000 DC |
|---|---|
| Class | Commercial/ Industrial |
| Max Gate Weight | 800 lbs |
| Max Gate Length | 25' |
| Motor | "BRUSHLESS 24 VDC, 13 AMPS" |
| Gate Speed | 12" per Second |
| VAC | 115- Single phase |
| Battery Backup System | (2) 7Ah 12VDC Batteries |
| W x L x H | 13" x 143" x 10" |
| Shipping Weight | 135 LBS |
| RAM 2000 DC | ||
|---|---|---|
| PART NUMBER | DESCRIPTION | QTY USED |
| 800-00-87 | Chassis R2000 AC/DC | 1 |
| 800-02-17 | Gear Reducer - Size 40, (C-Face) Ratio 40:1, Extended Shaft [R2000] | 1 |
| 800-04-05 | Motor, Dc 3.3 Nm 24 Vdc 1500 Rpm | 1 |
| 800-06-09 | Sprocket - 41Bs 15 X 3/4" [R1000Acdc,R5500Acdc,R2000Acdc] | 1 |
| 800-12-02 | Shaft, Idler Wheel - 8 1/2' X 5/8' (3/8' - 16 X 1 1/2' Thread) [R2000S] | 1 |
| 800-20-02 | Limit Switch [R2000S] | 2 |
| 800-20-50 | Limit Switch Nut - 5/8" Id [R50,R100,R5000S,R2000S] | 2 |
| 800-22-07 | Spring, Spring Loaded Bracket - Size 8- 1/2" [R100,R1000,R5500, R2000] | 2 |
| 800-34-22 | Set Screw - 1/4' - 20 X 3/8' | 2 |
| 800-37-25 | 3/8-16 X 1.75 Lg Round Head Square Neck Bolt | 2 |
| 800-42-10 | Key Way - 3/16" Sq. X 7/8" | 1 |
| 800-52-02 | Chain - #41Np (10Ft Per Box) | 2 |
| 800-54-26 | Limit Switch Bracket [R2000AC/DC] | 1 |
| 800-54-34 | Mounting Bracket Limit-Spring Loaded Bracket [R2000Acdc] | 1 |
| 800-54-35 | Mounting End Bracket (Front Swivel) [R2000] | 1 |
| 800-54-74 | Bracket, Spring Loaded [R2000Acdc] | |
| 800-55-52 | Plate, Top Mounting Gear Box [R2000Acdc] | 1 |
| 800-55-53 | Plate, Bottom (W/Bend) Mounting Gear Box [R2000Acdc] | 1 |
| 800-60-07 | Transformer, Dual 115V / 230V Input With 4 Input Leads | 1 |
| 800-60-35 | Bridge Rectifier, Single Phase, 100 V, 35 A, Module, 4 Pins, | 1 |
| 800-65-01 | Control Board, Logic [AC/DC] | 1 |
| 800-65-05 | Control Board, Driver [DC] | 1 |
| 800-70-00 | Dc Battery, 12Vdc - 7.5Ah [Bbs] | 2 |
| 800-70-22 | Horn Alarm Buzzer 120 Db | 1 |
| 800-70-43 | Plate, Reinforced Gear Box [R2000AC/DC] | 1 |
| 800-70-57 | Rail, 12 Awg-Left [R2000] | 1 |
| 800-70-58 | Rail, 12 Awg- Right [R2000] | 1 |
| 800-70-74 | Dc Conversion Plate [R2000 DC] | 1 |
| 800-70-80 | Sleeve, Rail Spacer - 5 1/4" X 13/16" [R2000S] | 1 |
| 800-70-81 | Spacer, Rail - 7 1/8' X 5/8' (3/8' - 16 X 7/8') [R2000S] | 1 |
| 800-70-82 | PCB Bench R2000 AC/DC | 1 |
| 800-70-85 | Snap Ring - 9/16' [R2000S] | 2 |
| 800-73-72 | Idler Wheel, Uhmw - 2 1/2" X 1 1/4" I.D. 5/8" [R2000] | 1 |
| 800-75-02 | Arm Release Assembly W/ Brackets | 1 |
| 800-75-32 | Cover Assym [R2000] | 1 |
| 800-75-95 | Trolley Release Assym | 1 |
| 800-75-96 | Trolley Cover Assym, Red [R2000] | 1 |